文章
  • 文章
搜索

嘉威奥拉伸油——专注拉伸油研发定制10年 

181-2963-9559

189-3350-4213

首页 >> 拉伸油百科 >>拉伸润滑油课堂 >> 不锈钢拉伸油使用方法与注意事项
详细内容

不锈钢拉伸油使用方法与注意事项

时间:2019-11-03     【原创】   阅读


不锈钢拉伸油使用方法与注意事项

Usage method
(1)对于深拉伸、非连续性冲压拉伸场合,手工刷油:用毛刷将拉伸油均匀涂刷到所需部件上,一般刷板材的一面或刷在凹模上; 滚筒涂油:用手动滚筒涂油,滚筒根据需要涂板材单面或两面;
(1) For deep drawing and non-continuous stamping and drawing occasions, manual brushing: brush the drawing oil evenly to the required parts with a brush, usually brush one side of the board or on the concave die; roller oiling: use manual drum oiling, drum coating one or both sides of the board as required;
(2)对于自动冲床连续性冲压拉伸场合,将拉伸油放入贮油装置槽,加工材料经过油浸,连续冲压即可。
(2) On the occasion of continuous punching and drawing of automatic punch press, the drawing oil is put into the tank of oil storage device, and the processed material is soaked in oil and stamped continuously.
注意事项
Matters needing attention
(1)本品应贮存于阴凉干燥处并保持容器密封,防止日晒雨淋;
(1) The product should be stored in a cool and dry place and keep the container sealed to prevent sunshine and rain;
(2)为确保冲压、拉伸效果,禁止与其它油脂合用,严禁混入金属碎屑、线毛等其它杂物;
(2) In order to ensure stamping and stretching effect, it is forbidden to use with other oils and fats, and to mix with other impurities such as metal debris, threads, etc.
(3)为获得良好外形尺寸和表面光洁度,涂油时应保证油品连续有效和均匀。
(3) In order to obtain good shape, size and surface finish, continuous, effective and even oil should be guaranteed.


在线客服
- 技术支持
  • 点击这里给我发消息
技术支持: 惠州网站建设 | 管理登录